CP Electronics has launched the RBT2 Run-Back Timer, a high output electronic timer to provide control for a wide range of loads. The RBT2 allows an appliance to be powered for a set period of time which can be easily adjusted by the user with a time out period of 15 minutes or 30 minutes, 1 hour or 2 hours.The RBT2 is easy to operate by pressing a button to start the timing control whilst the memory function remembers the previous time period selected. The LED display shows how much time is left to run and as the unit times out the position of the LED will change to show how much time is left giving a warning flash when 2 minutes are left on the timing schedule. The night light feature illuminates all the LED's when the unit is not in use, so the unit can be located in the dark. Pressing the switch whilst the unit is operating allows the user to cancel the timing program.
The RBT2 can be surface or flush fitted and has a supply voltage of 220-240 volts AC 50 Hz and can be used for 16 Amp resistive loads to include immersion heaters and 3 and 6 Amp fluorescent lighting.
