New PowerEmitter Modules
The new PowerEmitter modules were specially developed for integration into luminaires. Thanks to their optimised thermal management properties, these modules ensure a very long service life. Various optical attachments are available for the PowerEmitter modules to generate optimum radiation angles.
Pre-assembled leads ensure easy installation of the modules. In addition to this, the existing range of 1 W PowerEmitter modules is being extended by models fitted with 3 W LEDs in the first half of 2006. The modules will then be available in both monochrome as well as RGB.
New Monochrome EasyLED
The modules of the EasyLED 200-6 and 200-12 series, which were only available in white up to now, have been supplemented with monochrome models. EasyLED modules feature COB technology and are characterised by their unbeatable value. The modules are available in shapes of 200 x 10 mm and, by splitting the 200 mm module, of 100 x 10 mm.
Thanks to the EasyConnect connector system up to 10 or 15 modules with a one-sided power supply can be connected in a continuous row or at an angle using a special connector. The high stability of this connection system also makes the modules suitable for profiled solutions, thus permitting simple and solder-free assembly.
LEDLine Flex SMD In- and Outdoor (IP67)
These flexible line modules in SMD technology are now available in warm white as well as in a brighter white (W2). With a colour temperature of 2800 K, the warm white module is particularly suitable for home lighting. The W2 model is 70% brighter than the W1 model and rounds the range off.
Monochrome HighPerformance Standard Line
VS range of 6 W and 12 W HighPerformance standard line modules is now also being extended with monochrome models. The linear high-performance modules will shortly also be available in red, blue, green and yellow.
DigiLED DALI Colour Control Modules
The three-channel DigiLED DALI 3-CH colour control module was specially designed to control VS Optoelectronic`s RGB modules using the internationally agreed DALI protocol. In addition to this, the unit can be used for independent colour control of three monochrome LED modules.
DALI (Digital Addressable Lighting Interface) is an assembly listing that was specially developed for ambience-responsive and intelligent light management.
LED Constant Current Sources
To supplement the product range for controlling HighPower LED modules, a 350 mA/ 6 W alternative will also be available in addition to the already existing power drivers with ratings of 350 mA/ 11 W, 700 mA/ 17 W and 1050 mA/ 18W. The driver`s compact design allows easy integration into existing housings.
70 W Converters, 12 Volt
To round off the existing spectrum of available 24 V 70 W operating devices, VS Optoelectronic is extending its product range with several 12 V operating devices with an output rating of 70 W each. Just like the 24 V operating devices, the 12 V models are also available with or without strain relief as well as in an IP67 version. The converters are electronically protected against overload, overheating and short-circuiting and meet all relevant standards.
